Why Is My Window Draft Leak? (5 Causes, Ranked)

Most Likely Causes (Ranked)

Compressed or Hardened Weatherstrip on Window Sash

Very Common

Window weatherstripping compresses from daily operation and hardens from UV exposure over 10-20 years. Single-pane windows lose more heat through the glass than the seal, but double-pane windows with failed weatherstripping leak significant air. The meeting rail on double-hung windows and the bottom seal on sliding windows fail first.

How to tell: Draft felt near the window. Curtains move near the window on windy days. Condensation on glass in specific spots (cold air entering). Visible gap between sash and frame. Higher energy bills in winter.

Ductwork Gaps and Disconnections

Common

HVAC duct joints separate from vibration, age, or poor installation. The average home loses 20-30% of conditioned air through duct leaks.

How to tell: Rooms far from HVAC unit are hard to heat/cool. Dusty home. Higher energy bills.

Building Envelope Penetrations

Common

Gaps around pipes, wires, vents, and other penetrations through walls, ceilings, and floors allow air exchange.

How to tell: Drafts near outlets, plumbing penetrations, or light fixtures. Visible daylight through gaps.

Structural Settlement Gaps

Less Common

House settling creates gaps between framing, foundations, and finish materials that allow air movement.

How to tell: Gaps visible at wall/floor or wall/ceiling joints. Older home. Uneven settling.

Inadequate Insulation

Less Common

Missing or compressed insulation allows rapid heat transfer and creates convective air loops.

How to tell: Cold walls, floors, or ceilings. Ice dams in winter. High energy bills despite adequate HVAC.

How to Fix It

Replace Weatherstripping

$5-30

1Identify worn or missing weatherstripping.
2Remove old material, clean surface.
3Apply new weatherstripping matched to gap size and type.
4Test closure with a dollar bill — should grip firmly.

Seal Duct Joints

$10-30 DIY / $500-2,000 Pro

1Access ductwork in attic, basement, or crawl space.
2Clean joint surfaces and seal with mastic sealant or metal-backed tape (NOT fabric duct tape).
3Insulate ducts in unconditioned spaces.

Seal Penetrations

$5-20

1Identify air leaks with an incense stick or thermal camera.
2Seal gaps with appropriate material: caulk for small gaps, expanding foam for larger gaps, backer rod + caulk for big gaps.
3Seal around all pipes, wires, and vents passing through floors, walls, and ceilings.

When to Call a Professional

Air leaks increase energy bills by 20-40%.

In cold climates, air leaks cause ice dams and moisture problems.

Duct leaks in attics or crawl spaces can pull in contaminated air.

How to Prevent It

Weatherstrip doors and windows every 3-5 years.

Seal all penetrations during any renovation.

Have ductwork tested and sealed professionally.

Add insulation to recommended R-values for your climate.

Gas Safety: What Every Homeowner Must Know

Natural gas has no smell — the rotten egg odor is mercaptan, an additive specifically so you can detect leaks. If you smell it: leave immediately, no switches, no phones inside, call gas company from outside.

Gas work requires a licensed professional in most jurisdictions. Even tightening a fitting requires proper leak testing and often a permit. DIY gas work is illegal in many areas and genuinely dangerous.

Carbon monoxide (CO) is the invisible killer — odorless, colorless. Install CO detectors on every level. Have gas appliances inspected annually. Replace flex connectors every 10-15 years.