HomePlumbing LeaksRoof and Ceiling LeaksCar LeaksAppliance LeaksBasement and FoundationOutdoor and PoolGas and Air LeaksAbout
Home›Gas and Air Leaks›Gas Dryer Leaking Gas
Gas and Air Leaks

Why Is My Gas Dryer Leaking Gas?

A gas dryer leaking gas is most often caused by loose flex connector or worn gas valve seal — here's how to diagnose it, what it costs to fix, and when to call a pro.

Act Now

A gas dryer leaking gas can cause significant damage. Diagnose and address quickly.

The Short Answer

Loose Flex Connector or Worn Gas Valve Seal. A gas dryer leaking gas is most often caused by loose flex connector or worn gas valve seal — here's how to diagnose it, what it costs to fix, and when to call a pro.

Most Likely Causes (Ranked)

1

Loose Flex Connector or Worn Gas Valve Seal

Very Common

Gas dryers connect to the gas line with a flexible stainless steel connector. Moving the dryer for cleaning or repair stresses this connector — the fittings can loosen or the connector can kink. The internal gas valve also wears over 10-15 years. Any gas smell near the dryer requires the gas supply to be shut off immediately.

How to tell: Gas smell behind the dryer. Smell is stronger when the dryer is pulled away from the wall. The flex connector is kinked. Connections are loose from moving the dryer for maintenance.
2

Corroded or Damaged Pipe

Common

Black iron gas pipes corrode over decades, especially in damp areas. Physical damage from construction or accidents can crack lines.

How to tell: Smell near pipe run. Visible corrosion or damage. Old home with original gas lines.
3

Faulty Appliance Valve

Common

Gas valves on stoves, heaters, and fireplaces wear internally, allowing small amounts of gas to pass when off.

How to tell: Smell near specific appliance when off. Valve is stiff or doesn't click firmly into off position.
4

Failed Gas Flex Line

Common

Flexible corrugated stainless gas connectors have limited lifespan (10-20 years) and can fail from kinking or corrosion.

How to tell: Smell near flex connector behind appliance. Connector is kinked, corroded, or old.
5

Underground Line Damage

Less Common

Tree roots, construction, and ground shifting can damage underground gas lines.

How to tell: Smell in yard or near foundation. Dead vegetation in a line pattern. Hissing from ground.

How to Fix It

EMERGENCY: Leave and Call

Free
  1. 1If you smell gas: DO NOT operate switches, phones, or create sparks.
  2. 2Leave the building immediately.
  3. 3Call gas company emergency line from outside.
  4. 4Do not re-enter until cleared by gas company.

Tighten Gas Fitting

$0-5 (Certified Pro Only)
  1. 1Gas work requires a licensed professional in most jurisdictions.
  2. 2Pro applies gas-rated pipe compound or Teflon tape to threads.
  3. 3Leak tested with gas detector or soap bubble solution.

Replace Gas Flex Line

$20-50 parts / $100-200 Pro
  1. 1Turn off gas supply to appliance.
  2. 2Disconnect old flex line.
  3. 3Install new CSA-approved flex connector of proper size.
  4. 4Leak test all connections before turning on gas.

When to Call a Professional

If you smell gas, leave immediately. Do not use phones, light switches, or anything that can spark.

Gas leaks can cause explosion and carbon monoxide poisoning.

DIY gas repair is illegal in most jurisdictions and extremely dangerous.

Never use non-approved materials (rubber hose, copper tubing) for gas connections.

How to Prevent It

Have gas appliances professionally inspected annually.

Install CO detectors on every level of your home.

Replace gas flex connectors every 10-15 years.

Know where your gas shutoff valve is and how to use it.

Gas Safety: What Every Homeowner Must Know

Natural gas has no smell — the rotten egg odor is mercaptan, an additive specifically so you can detect leaks. If you smell it: leave immediately, no switches, no phones inside, call gas company from outside.

Gas work requires a licensed professional in most jurisdictions. Even tightening a fitting requires proper leak testing and often a permit. DIY gas work is illegal in many areas and genuinely dangerous.

Carbon monoxide (CO) is the invisible killer — odorless, colorless. Install CO detectors on every level. Have gas appliances inspected annually. Replace flex connectors every 10-15 years.

Frequently Asked Questions

What should I do if I smell gas?

Leave immediately. Don't flip switches or use phones inside. Call gas company from outside. Don't re-enter until cleared.

How do I test for a gas leak?

Professional: gas leak detector. DIY soap test: mix dish soap with water, brush on fittings, watch for bubbles. Never use a flame.

Can I fix a gas leak myself?

In most jurisdictions, gas work requires a licensed plumber or gas fitter. Even minor work often requires a permit and inspection.

How much does gas leak repair cost?

Simple fitting tightening: $100-200. Line replacement: $300-1,500. Underground line: $2,000-5,000+.

Related Guides

Furnace Flue Pipe Leaking
Furnace Flue Pipe Leaking
Furnace Leaking Gas
Furnace Leaking Gas
Gas BBQ Regulator Leaking
Gas BBQ Regulator Leaking
Dryer Leaking Water
Dryer Leaking Water
Stackable Washer Dryer Leaking
Stackable Washer Dryer Leaking
← All Gas and Air Leaks Guides